
Transforming vulnerable basements into fortified foundations through cutting-edge waterproofing technology.
Lifetime transferable warranty on all waterproofing installations
24-hour inspection, 48-hour installation guarantee
Transparent pricing with flexible financing options available
Protect your home's foundation, prevent mold growth, and increase property value with professional waterproofing.
Most residential waterproofing projects are completed within 2-3 days, with minimal disruption to your daily routine.
Advanced moisture detection
Custom waterproofing plan
Lifetime warranty coverage
20% off winter waterproofing services
Complete internal drainage systems
Foundation membrane installation
Professional foundation crack sealing
High-capacity drainage solutions
Membranes & Coatings
Pumps & Drains
Guards & Partitions
High-density polyethylene (HDPE) dimpled drainage membrane providing air gap technology for foundation walls. Creates effective moisture barrier and drainage plane.
One-component seamless rubberized asphalt membrane. Cold applied elastomeric compound replaces hot mop systems.
Rigid foam insulation panels with integrated drainage channels. Provides R-10 insulation value while managing moisture.
Color: | Black |
Solids by Weight: | 65% (approx.) |
Density: | 0.94 kg/L (7.7 lbs/gal) |
Coverage: | 2.5 L/mΒ² @ 90 mils wet |
Initial Set: | 8 hours @ 25Β°C, 45% RH |
Full Cure: | 24 hours |
Elongation (ASTM D412): | 1500% |
Recovery: | 85% |
Shore A Hardness: | 35 |
Water Vapour Permeance: | 0.05 perms (ASTM E96) |
Important: Must be protected from damage during construction. Not for permanently exposed surfaces. Allow membrane to cure before installing polystyrene insulation. Minimum application temperature: -12Β°C.
Professional-grade 1/3 HP submersible pump with automatic operation. Model 2312 delivers reliable basement protection.
4" corrugated HDPE drainage pipe with filter sock. Meets NBC 9.14.3 requirements for foundation drainage.
Polyurethane injection for structural crack repair. Expands to seal cracks from 1/64" to 1/4" wide.
All glass products meet NBC Section 2.1.1 and DIN EN 14179-1 standards for safety glass in buildings.
Heat soaked tempered safety glass for railings and guards, tested to DIN EN 14179-1 standards.
Designed to remain in frame if broken, preventing dislodgement per NBC 2.1.1.2 requirements.
Application | Glass Type Required | Thickness | Standard |
---|---|---|---|
Guards - Floor Edge | Heat Strengthened Laminated | 10mm+ | NBC 2.1.1.1 |
Guards - Inward | Heat Soaked Tempered | 6mm+ | DIN EN 14179-1 |
Office Partitions | Tempered or Laminated | 10-12mm | NBC Part 4 |
Shower Enclosures | Tempered Safety Glass | 8-10mm | ANSI Z97.1 |
Free inspection and detailed quote
NBC compliant materials chosen
Certified technicians, quality assured
Long-term protection guaranteed
Get a free inspection and quote from Toronto's most trusted waterproofing experts.